24/7 emergency AC & heating service in all 12 DFW counties Open 24/7 · Log in · Hablamos español
DFW Heat & AirHeating · Cooling
Home / Guides / AC not cooling
Homeowner guide

AC Not Cooling? What to Check Before You Call

Five quick checks when your air conditioner runs but the house won't cool, and the warning signs that mean turn it off and call now.

Most no-cool calls in Dallas–Fort Worth come on the first hot weeks of the year or in the middle of a heat wave. Before you call, these quick checks can save you a visit, and they'll help us fix it faster if you do need us.

1. Check the thermostat

Make sure it's set to Cool, the set temperature is below the room temperature, and the fan is on Auto. If the screen is blank, replace the batteries.

2. Check the air filter

A clogged filter is the most common cause of weak airflow and frozen coils. If you can't see light through it, replace it.

3. Check the breakers

Look for a tripped breaker for the AC and for the furnace or air handler. Reset it once. If it trips again, leave it off and call us; something is shorting.

4. Look at the outdoor unit

Is the fan spinning and the unit humming? If it hums but the fan doesn't spin, a failed capacitor is likely. Turn the system off at the thermostat so the compressor isn't damaged, and call.

5. Check the drain line

Many systems have a float switch that shuts the AC off when the condensate drain backs up. Water in the drain pan or a wet ceiling stain near the unit points to a clogged drain.

When to turn it off and call right away

  • Ice on the refrigerant lines or indoor coil
  • A burning smell, buzzing or grinding
  • Water leaking through a ceiling
  • The breaker trips again after one reset

We answer 24/7 at (214) 952-4247.

Frequently asked questions

Is it normal for my AC to run all day in August?

On 100°F days a correctly sized system may run almost constantly in the afternoon and still only hold about 20 degrees below the outdoor temperature. If the house keeps getting warmer, or it's running all night too, something is wrong.

Can I add refrigerant myself?

No. Refrigerant isn't used up; if it's low there is a leak. Handling refrigerant requires EPA certification, and topping it off without fixing the leak just postpones the problem.

Why is there ice on my AC lines?

Ice usually means poor airflow (dirty filter, blocked return, failing blower) or low refrigerant. Turn the cooling off, run the fan only to thaw it, and call for service.

Call 24/7 Book service

Book service or a free estimate

4 quick steps · about 60 seconds

ProjectAddressTimeContact

Step 1 of 4What can we help with?

Step 2 of 4Where's the property?

Step 3 of 4Pick a day and arrival window

Step 4 of 4Who should we confirm with?

New-system estimates are free. Repair visits have a diagnostic fee credited toward the repair. By booking you agree we may call or email you about this appointment.

No obligation. We never sell or share your information.