A second floor that runs several degrees warmer than downstairs is one of the most common complaints we hear in Dallas–Fort Worth, especially in two-story homes built in the last 30 years. Heat rises, and in Texas the attic above your bedrooms can reach 140°F.
The usual causes
- Leaky or crushed ducts in the attic dumping cooled air before it reaches the rooms
- Not enough return air upstairs, so warm air has nowhere to go
- Undersized duct runs to the farthest rooms
- Thin attic insulation or a hot roof deck
- One thermostat downstairs controlling the whole house
Fixes, from simplest to most complete
- Seal and repair leaking ducts and re-balance airflow
- Add a return upstairs or enlarge undersized runs
- Replace the failing duct with insulated duct sized room by room
- Add zoning so upstairs has its own thermostat
- A separate upstairs system for larger homes
Duct work typically runs $350–$650 per run. We measure airflow and temperature in each room on the visit and give you written options. See ductwork & indoor air quality →
Frequently asked questions
Should I just turn the thermostat down?
Lowering the setting makes downstairs colder without fixing the upstairs, and raises your bill. Fixing airflow is the real solution.
Will a bigger AC fix a hot upstairs?
Usually not. If air isn't getting upstairs, a bigger system just makes downstairs colder and short-cycles. Ducts and returns are the usual culprit.
What does zoning cost?
Zoning with motorized dampers and a second thermostat is more involved than duct repairs, and a separate upstairs system costs more again. We'll show options from simplest to most complete.